Please submit your message online and we will contact you as soon as possible!
Product Description:30 Port L3 Managed 10G Uplink 2.5G PoE Switch, provides 24*100/1000/2500M PoE Ethernet Ports+6*10Gb SFP+ Ports+1*RJ45 console Port. With perfect security control policy and CPU Protect Policy, it can improve fault tolerance and ensure the stable operation of the network and load balance of links. The switch supports automatic DoS attack defense, SNMP, IEEE 802.1, STP, RSTP, and link aggregation. With advanced security features and advanced quality of Service (QoS), it can be used as a core, distribution or access layer switch with high-end port density, ease of management, it is an ideal choice for a variety of business networking applications.
Specification |
|
I/O Interface |
|
Power Input |
AC100-240V 50/60Hz |
Ethernet |
24* 100/1000/2500 Mbps PoE Ports (Ports 1-4 support IEEE802.3bt(90W)) 6* 10G SFP+ Port 1* RJ45 Console Port |
Performance |
|
Bandwidth |
240Gbps |
Packet Forwarding Rate |
178.56Mpps |
DDR SDRAM |
512MByte |
Flash Memory |
32MByte |
Buffer Memory |
16Mbit |
MAC Address Table |
32K |
Jumbo Frame |
10Kbyte |
VLANs |
VLAN range 1-4094, with a maximum active VLAN of 4K |
Standard |
|
Network Protocol |
IEEE802.3 Ethernet MAC IEEE802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z 1000BASE-X Gigabit Ethernet (SFP) IEEE 802.3ae 10G Ethernet IEEE802.3x Flow Control IEEE 802.3az Energy-efficient Ethernet IEEE 802.3ad Standard method for performing link aggregation IEEE 802.1AB LLDP/LLDP-MED (Link Layer Discovery Protocol) IEEE 802.1D Spanning Tree Protocol(STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE 802.1Q (VLAN Bridge Operation) IEEE 802.1p (VLAN Label) IEEE 802.1X Client/Server Access Control and Authentication |
PoE Standard |
IEEE802.3af (15.4W), IEEE802.3at(30W) IEEE802.3bt(90W) |
Industry Standard |
EMS: EN61000-4-2 (ESD), EN61000-4-5 (Surge) |
Network Medium |
10Base-T: Cat3, 4, 5 or above UTP(≤100m) 100Base-TX: Cat5 or above UTP(≤100m) 1000Base-TX: Cat5 or above UTP(≤100m) |
Fiber Medium |
Multi-mode Fiber: 50/125, 62.5/125, 100/140um Single-mode Fiber: 8/125, 8.7/125, 9/125, 10/125um |
Certification |
|
Safety Certificate |
CE, FCC, RoHS |
Environment Standard |
|
Working Environment |
Working Temperature: -10~50°C Storage Temperature: -40~70°C Working Humidity: 10%~90%, non-condensing Storage Temperature: 5%~95%, non-condensing |
Function Indicator |
|
Indicator |
PWR (Power Indicator), SYS (system Indicator), Link (Link Indicator), ACT (ACT Indicator) |
PWR |
On: Powered On Off: Powered Off |
SYS |
On: System On Flashing: System Off or Failed |
PoE Power Light |
Off: indicates PoE power usage is less than 90% Flashing: indicates PoE power usage of 90% ≤ P ≤ 95%
On: indicates that PoE power is used at 95% |
Warning light |
System temperature or voltage abnormal alarm |
Port/Link Light |
Green ON: 2.5G Link Yellow On: 100/1000M Link Flashing: Link transmission Off: Link not transmission |
PoE Light |
On: PoE powered on Off: PoE powered off |
SFP Port Light |
Blue On: 10G Link Green On: 2.5G Link Flashing: Link transmission Off: Link not transmission |
Reset Button |
Short press for less than 5 seconds to restart Long press for more than 5 seconds to reset to factory default |
Physical Specification |
|
Structure Size |
Product Dimensions: 440*281*44mm
Package Dimensions: 500*365*85mm Product N.W: 4.37KG Product G.W: 5.14KG |
Packing Info |
Carton Dimensions: 520*445*385mm
Packing Qantity: 5 Pieces Packing weight: 26.7KG |
Power Voltage |
Working Voltage: AC100-240V 50/60Hz Power Supply: DC 54V7.69A 12V5A |
Power Consumption |
PoE: PoE Total Power maximum 400W Power Consumption: maximum 52W |
Package List |
Switch: 1 set; instruction manual: 1 set; certificate of quality: 1 set; power cord: 1 set; serial cable: 1 set; mounting ear: 1 pair. |
L3 Function |
|
IPv4 |
IPv4 VLAN Interface |
IPv4 Static Routes |
|
ARP |
|
IPv6 |
IPv6 VLAN Interface |
IPv6 Static Routes |
|
IPv6 ND |
|
RIP |
V1/V2 |
OSPF |
Router-ID |
Authentication |
|
V2 |
|
L2 Function |
|
Port |
Port Switch |
Port Description |
|
Port Speed |
|
Port Duplex |
|
Port Flow Control |
|
Jumbo, Up to 10K |
|
Support 10G/2.5G (2023.3.2) |
|
Fiber Module(DDM) |
|
Link Aggregation |
Supports load balance policy; Base on MAC and IP-MAC |
Static and Dynamic Group |
|
Supports LACP |
|
Up to 8 groups |
|
Storm Control |
Boardcast |
Unknown Multicast |
|
Unknown Unicast |
|
Port Mirroring |
One to one monitor |
Many to one monitor |
|
Ingress/Egress/Both |
|
Up to 4 session groups |
|
Port Security |
MAC Address Constraints |
Port Security MAC Address |
|
Protect/Restrict/Shutdown |
|
Port Isolation |
|
Port Rate-limit |
|
Loopback Detection |
|
VLAN |
Access/Trunk/Hybrid |
VLAN Tunnel (Q-in-Q Tunnel) |
|
Congurable VID from 1 - 4094; Max. 4K static VLAN groups |
|
Voice VLAN |
|
MAC VLAN |
|
Surveillance VLAN |
|
Protocol VLAN |
|
GVRP |
MAC Address |
Dynamic Address |
Static Address |
|
Filtering Address |
|
Spnning Tree Protocol |
STP/RSTP/MSTP |
BPDU Filter |
|
BPDU Guard |
|
Edge Port |
|
LLDP |
LLDP |
LLDP MED |
|
Multicast |
IGMP Snnoping |
IGMP V1/V2/V3 |
|
Router Port |
|
Static IGMP group address |
|
IGMP groups filtering |
|
Querier |
|
MLD Snooping |
|
MVR |
|
QoS |
Traffic classification based, Strict priority and WRR |
Port Priority |
|
802.1P Priority |
|
IP TOS Priority |
|
IP DSCP Priority |
|
Supports up to 8 queues per port |
|
Priority Remarking |
|
PoE |
|
PoE Configuration |
PoE Temperature |
PoE Type/Level/Power/Voltage/Current |
|
PoE Switch |
|
PoE Watchdog |
|
PoE power AF/AT adaptation |
|
IEEE 802.3bt,compatible with IEEE 802.3af/802.3at PoE |
|
PoE Schedule |
|
PoE Port Timer Reboot |
|
Services |
|
DHCP |
DHCP Server |
IP Pool |
|
Static Binding |
|
DHCP Relay |
|
Option 43 |
Access Protocol |
HTTP |
HTTPS |
|
Telnet |
|
SSHv2 |
|
Manager ACL |
|
Session Timeout |
|
Password Retry Count |
|
Silent Time |
|
Security |
|
AAA |
RADIUS |
TACACS+ |
|
802.1X |
|
Base on port/MAC/local/WEB |
|
DHCP Snooping |
Global/VLAN |
Option 82 |
|
Circuit ID |
|
IP Source Guard |
|
Dynamic ARP Inspection |
|
DOS |
|
ACL |
MAC ACL |
IPv4 ACL |
|
IPv6 ACL |
|
Diagnostics |
|
Syslog |
Logging Message |
Remote Server |
|
Ping |
|
Traceroute |
|
Copper Test |
|
UDLD |
|
Managemnet |
|
Manager Access |
Console |
HTTP/HTTPS |
|
Telnet |
|
SSH |
|
SNMP |
|
Manager IP |
Static Address |
DHCP Client |
|
Supports IPv4 and IPv6 address |
|
Manager VLAN |
|
DNS |
|
Time Synchronization |
SNTP |
Manual Time |
SNMP |
V1/V2C/V3 |
Community |
|
V3 User |
|
Group |
|
Trap Host |
|
SNMP MIB |
RFC 1213 MIB-II |
RFC 1493 Bridge MIB |
|
RFC 1643 Ethernet MIB |
|
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) |
|
RFC 2863 Interface MIB |
|
LLDP |
|
Private MIB |
|
RMON |
Statistics |
History |
|
Event |
|
Alarm |
|
User |
|
Firmware |
Double Image; Swap between Active and Alternate firmware image. |
Firmware Upgarde |
|
Configuration |
Upload and download |
Upload and download via USB interface |
|
Save |
|
Restart |
|
Factory Defaults |
|
Standards Compliance |
|
IEEE 802.3x flow control and back pressure |
|
IEEE 802.3ad port trunk with LACP |
|
IEEE 802.1D Spanning Tree Protocol |
|
IEEE 802.1w Rapid Spanning Tree Protocol |
|
IEEE 802.1s Multiple Spanning Tree Protocol |
|
IEEE 802.1p Class of Service |
|
IEEE 802.1Q VLAN tagging |
|
IEEE 802.1x Port Authentication Network Control |
|
IEEE 802.1ab LLDP |
|
IEEE 802.3af Power over Ethernet |
|
IEEE 802.3at Power over Ethernet Plus |
|
IEEE 802.3bt PoE++ Power over Ethernet Plus Plus |
|
RFC 768 UDP |
|
RFC 793 TFTP |
|
RFC 791 IP |
|
RFC 792 ICMP |
|
RFC 2068 HTTP |
|
RFC 1112 IGMP v1 |
|
RFC 2236 IGMP v2 |
|
RFC 3376 IGMP v3 |
|
RFC 2710 MLD v1 |
|
FRC 3810 MLD v2 |
|
RFC 2328 OSPF v2 |